Post by account_disabled on Dec 28, 2023 4:27:17 GMT -6
From high pressure to atmospheric pressure, it causes the fragmentation into aerosols. Then deliver the solution with a high-speed air beam, causing the solution to spray 5-7 meters away. Robot system: structural design wheel positioning weight balancing In order to move the robot smoothly By setting the speed Can move in all areas Uses 2 fully pneumatic rubber wheels and is supplemented with 2 independent wheels. Electrical systems and communication systems: radio signals The range of control is 50 meters. In open space, there is a system to turn on and off, dispense liquid, and control the jet head in the desired direction. The robot's movement is controlled through a camera mounted on the front of the robot. To help the operator control it more easily.
Prof. Dr. Sathaporn explained that in addition, the robot uses a safety control Phone Number List circuit to supply direct current. Which is the electrical system of the robot divided into 2 parts: 1) The transmitter will look like a Joy Controller that receives commands from the user. Consists of a control switch Radio transmitter and camera display from robot The transmitter receives the keypad values from the user and sends them to 2) the receiver consists of a radio receiver that receives data from the radio transmitter. sent to the microcontroller The microcontroller then verifies the received data.
It then sends a signal to the motor control board. The motor is divided into 3 parts: (1) the motor that drives the wheels (2) the motor that rotates the spray head Used for rotating the spray unit and (3) the jet motor is mounted in the spray cylinder. can adjust speed Adjust the wind strength to be more or less appropriate to the location. However, the ULV (ULV) robot kills germs and viruses. It has been tested and used for field work by spraying to prevent the spread of coronavirus disease 2019 (COVID-19) to areas within the university. It was sprayed in the conference room. Meeting place Indoor arenas, workplaces, offices, arenas and cafeterias are great technological innovations. It truly meets the need for usability. Work from KMUTNB's fence that was created for Thai people.
Prof. Dr. Sathaporn explained that in addition, the robot uses a safety control Phone Number List circuit to supply direct current. Which is the electrical system of the robot divided into 2 parts: 1) The transmitter will look like a Joy Controller that receives commands from the user. Consists of a control switch Radio transmitter and camera display from robot The transmitter receives the keypad values from the user and sends them to 2) the receiver consists of a radio receiver that receives data from the radio transmitter. sent to the microcontroller The microcontroller then verifies the received data.
It then sends a signal to the motor control board. The motor is divided into 3 parts: (1) the motor that drives the wheels (2) the motor that rotates the spray head Used for rotating the spray unit and (3) the jet motor is mounted in the spray cylinder. can adjust speed Adjust the wind strength to be more or less appropriate to the location. However, the ULV (ULV) robot kills germs and viruses. It has been tested and used for field work by spraying to prevent the spread of coronavirus disease 2019 (COVID-19) to areas within the university. It was sprayed in the conference room. Meeting place Indoor arenas, workplaces, offices, arenas and cafeterias are great technological innovations. It truly meets the need for usability. Work from KMUTNB's fence that was created for Thai people.